Informational content provided by Jamie at ImmersionHeaters.uk

Call on 07897 246779.

Remember all of the stuff that applies to all water immersion heaters, plus for oil heaters our target is to get the watts density down to 12w/in² or below for heavy, industrial oils, and 25w/in² or below for lighter cooking oils.

POIL Oil Imersion Heater

Oil Imersion Heater

The II Range has many benefits, including bespoke screwplug size, immersed length, double stat pockets, etc, all with a 2 week leadtime. The 8mm elements can be double looped to fill your maximum available immersed length with a large overall length of element. As can be seen in the fifth image on our PII web page, the elements drop from the screwplug to your maximum available immersed length, before looping back up to within a few inches of the screwplug, before dropping back to full immersed length, then returning back up to the screwplug. This allows us to fit nearly twice the length of element possible in a plain U bent element. For example, in 24″ of maximum immersed length, we could use an 84″ element double looped.

if you have a very large tank with a massive maximum available immersed length, you may choose not to double loop, but to have plain U bent elements over a meter in length.

Informational content provided by Jamie at ImmersionHeaters.uk …who would love you to leave a comment.